GET AN ESTIMATE
Thank you for contacting Tri-Con Construction LTD, a representative will contact you shortly.
Slider
Armourplast Classic (5.0)
Comprised of a non-woven reinforced polyester mat, this product is impregnated and coated with APP modified bitumen to a nominal thickness of 5.0 mm (198 mils). Talc is applied to the surface to prevent sticking in the roll, while a protective, poly-film is bonded to the underside of the membrane. Classic (5.0) can be applied as the base ply in a two-ply Armourplast system or as the top ply in a two-ply ballasted or exposed membrane system. Meets CGSB 37.56 M and ASTM D 6222.

Armourplast Granular
Reinforcing mat of durable, non-woven reinforced polyester which is coated and impregnated with Armourplast modified bitumen to a nominal thickness of 4.0 mm (158 mils). The surface is covered with ceramic mineral granules to provide added UV protection, while a poly-film is bonded to the underside. This sheet can be used as the top ply in a flashing installation or as the protective cap for a conventional BUR system. This product conforms to CGSB 37.56M and ASTM D 6222.

Armourplast Classic
A non-woven reinforced polyester mat, impregnated and coated with APP modified bitumen to a nominal thickness of 4.0 mm (158 mils). Talc and a poly-film are applied to the top and bottom surfaces respectively. Classic can be applied as the base ply in a two-ply Armourplast System or as the top ply in a two-ply ballasted or exposed membrane system (acceptable coating required). This product conforms to CGSB-56.M and ASTM D6222.

Powered by YourWebPro - Roofing and Contractor Websites
Tri-Con Construction LTD Images
Close [x]